Iron structure, which allows to maintain and move the preamplifier of hemodynamic studies through the procedure table. Use in Feas Electronica brand hemodynamic and electrophysiology polygraphs exclusively.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

PRODUCT DESCRIPTION

Rolling unit ideal for use in clinics, sanatoriums, hospitals and health centers in general. Allows organized storage of supplies and placement of equipment on the top shelf
Multipurpose trolley.
Top shelf with protective railing and transparent cover.
Sliding ABS drawer, with internal compartments that allow efficient organization of supplies.
ABS middle shelf.
Bottom shelf made of ABS.
Material: ABS, high impact engineering plastic.
2 garbage cans with lid
4 silent wheels of 13 cm, 2 of them with brakes.
Warranty: 1 year.
Aluminum structure covered with ABS plastic, material resistant to rust and corrosion.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Multifunction pedal, consisting of three silicone rubber buttons for the Micromotor Fisiodispenser for dental implantology with which the pump, the direction of rotation and the passage through the different functions can be manipulated.
· Hands-free equipment to control and manage programs.
· Heavy multi-function pedal for good stability.
· Main control: controls the motor in progressive (linear) mode or can be programmed to operate in on / off mode.
· Function: Pressing it once toggles from one function to another. Holding it down, navigates between the three programs for each function.
· Direction of rotation: The micro motor has the possibility of reversing its rotation using the DIRECT / REVERSE button on the keyboard, or the "Direction of rotation" button on the pedal. The REVERSE direction is indicated on the display and by an audible tone.
· Pump: by pressing once, it will turn on and off. By keeping the last selected stream. Holding tight increases the flow: off, on 25%, on 50%, on 75%, on 100%, off. This is represented on the screen by 1, 2, 3 or 4 drops.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Nellcor Doc-10 SpO2 Extension Cable

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Neonatal oximeter sensor DB9M/G Feas Electronica 3026.

This sensor is used in oximetry monitoring systems to non-invasively determine Percent Oxygen Saturation (SpO2), pulse rate, and pulse plethysmographic waves.
Its use is indicated for patients of less than 3kg.

It has a length of 40 cm.
Protection against liquids IPX1.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Disposable accessory, which prevents moisture from entering the equipment and connects the patient circuit line to the monitoring system. It can be reused as long as it is disinfected. It is implemented in adult and pediatric patients in a Feas Electrónica multiparameter monitor, under the supervision of trained health care staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way cuff, with hose connector included, reusable, for non-invasive blood pressure measurement.

Size: 10 to 19 cm in circumference. Neonatal patient.
Suitable for human and animal patient.
Warranty: 3 months.

This bracelet is suitable for different brands of equipment and different equipment (multiparameter monitors, defibrillators, blood pressure monitors). What you have to take into account is the connevtor that is at the end of the hose, which must be the same to be able to connect to the equipment. If the connector is not the same, then you can save the connector from the cuff it will replace the connector on the cuff that came with your purchase.

Synonymous names: Armband/ Cuff/ Chambers for non-invasive pressure

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable handle/ cuff for non-invasive blood pressure measurement.
Size: 23 to 33 cm in circumference.
With hose connector included
For adult patient

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way resusable cuff for non-invasive blood pressure measurement.
Size: 18 to 26 cm arm circumference.
With hose connector included.
For a small pediatric patient.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way resusable cuff for non-invasive blood pressure measurement.
Size: 18 to 26 cm arm circumference.
With hose connector included.
For a small pediatric patient.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable cuff for non-invasive blood pressure measurement.
Size: 20,5 to 28 cm of arm circumference.
With hose connector included.
For small adult.
Suitable for human and animal patient.

This cuff is suitable for different brands of equipment and different equipment (patient monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector on the cuff you will be replacing and use it to replace the connector on the cuff that will deliver with your purchase.



The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Two tubes, reusable cuff for non-invasive blood pressure measurement.
Size: 25 - 35 cm in circumference. Adult human patient.
Suitable for human and animal patient.
Warranty: 3 months.
This bracelet is suitable for different brands of blood pressure monitors.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable handle/ cuff for non-invasive blood pressure measurement.
Size: 27.5 to 36.5 cm in circumference.
With hose connector included
For adult patient

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable Handle/Cuff for non-invasive blood pressurre measurement.
Size: 35,5 to 46 cm in circunference.
With hose connector included.
For adult patient.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Single tube reusable cuff for non-invasive blood pressure measurement.
Size: 46 to 66 cm arm circumference.
With hose connector included.
For adult patient and animal.
Suitable for human and animal patient.
Warranty: 3 months.
This bracelet is suitable for different brands of equipment and different equipment (multi-parameter patient monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector from the bracelet that you will be replacing and use to replace the connector as the bracelet that was delivered with your purchase.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-tube resusable cuff for non-invasive blood pressure measurement.

Size: 6 to 11 cm of arm circumference.
With hose connector included.
For pediatric or neonatal patient.

This cuff is suitable for different brands of equipment and different equipment (multi-parameter monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector from the cuff that you will be replacing and use to replace the connector as the cuff that was delivered with your purchase.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Hoses for non-invasive pressure cuff, KTMED
With two quick couplings 3 meters long.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Battery suitable for automated external defibrillators such as Zoll automated external defibrillator

· It is intended to be used in Dental Implants, in all its stages, and in all types of patients.
· This equipment has been design following international standards, in terms of perfomances and functions.
· High quality motor and great torque, free of vibrations.
· By using a key, you can access the maximum torque selection applied to the tool, between 5 and 45 N cm, or disabled.
· Its adjustable electronic torque meter differentiates it from other equipment.
· Both speed and torque are relative to the selected Reduction. Handpiece reduction: 16:1, 20:1 and 32:1, and digital speed selection, displayed on the display.

MULTIFUNCTION FOOT CONTROL

· Hands-free device for control and programs.
· Heavy multifunction foot control for high stability.
· Main control: It starts the motor in progressive mode (linear) mode or it can be programmed to operate as on/off mode.
· Function: When pressed once, it alternates from one to the other. While holding down, navigate between the three programs of each function.
· Turn: The micro motor tool has the possibility of inverting its rotation, using the DIRECT/REVERSE button on the keyboard, or "Turn" in the multifunction foot control.
· The reverse direction of rotation is indicated on the screen and by an audible tone.
· Pump: Press once, it will turn ON or OFF, when turns ON recalls the last flow rate. Keeping pressed, increase the flow; Off, On 25, On 50, On 75, On 100, Off. This is being represented on the display with 1, 2, 3, or 4 drops.

PERISTALTIC PUMP

Is located in the back of the equipment. Supply 15 ml/min to 45 ml/min for jobs that require it.

CONTENTS

- 1 Main Unit Control.
- 1 Main Power Cable.
- 1 Multifunction Foot Control.
- 1 Brushless Micromotor.
- 1 Sterilisable Headpiece Holder.
- 3 Set Irrigation Tubes.
- 1 User's Manual.
(Handpieces are not included).

TECHNICAL SPECIFICATIONS

Unit Control:
- Global Size: 270mm x 115mm x 230mm.
- Power Input: 90Vac-240Vac 50/60Hz (Automatic).
- Line Fuse: 2.5A/250V, 5mm x 20mm SB.
- Nominal Power: 3W.
- Maximum Power: 150W.
- Screen: LCD - 5.5" (High Luminosity).
- Weight: 2Kg.

Pump:
- Type: Peristaltic with 3 rollers.
- Flow: 15-45ml/min including off.

Multifunction Foot Control:
- Global Size: 18mm x 13.5mm x 43mm.
- Weight: 1.65Kg.
- Protection grade: IPX4.

Motor:
- Rate: 500rpm, 50000 max.
-Torque: 5 to 45 N.cm.



















The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.