This cabinet allows a AED Defibtech to be mounted on a wall to increase visibility and to protect the AED from theft or damage.

Grayhill trim knob. Replacement for rotary knob of the Multipair Monitor

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Handle of pump door replacement, infusion pump Sino MDT Ltd 1500H.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

INFRARED THERMOMETER FOR NON-CONTACT MEASUREMENT.

- Digital forehead thermometer with non-contact infrared technology.
- Easy to use. Measure temperature simply and quickly with the push of a button. The measurement time is less than 1 second.
- It has a sound fever alert (≥ 37.8ºC).
- Ideal for measuring the temperature in adults, children and babies. It can also measure the temperature on surfaces of objects and liquids. The measurement range in people is from 32ºC to 42.9ºC and the range on surfaces is from 0ºC to 100ºC.
- Accurate measurement. Ideal for taking body temperature with a minimum margin of error (± 0.2º).
- LCD screen illuminated in three colors: green, orange and red.
- Safe and hygienic. Ideal for home and professional use.
- Ability to save up to 32 records in its memory.
- Automatic shutdown after 15 seconds.

TECHNICAL CHARACTERISTICS:
Name: Infrared thermometer.
Model: BZ-R6
Non-contact measurement.
Measuring distance: 3-15cm.
Measurement time: ≤0.5s
Audible fever alert (≥ 37.8ºC)
Measurement range on surfaces: from 0 to 100ºC
Measurement range in people: 32-42.5ºC (89.6-108.5ºF)
Precision:
- Within the range 35-42ºC: ± 0.2ºC
- Outside the range 32-42.9º: ± 0.3ºC
Measurement units: ºC / ºF
Memory for the last 32 measurements
Illuminated LCD screen in three colors: green, orange and red.
Automatic shutdown: 15 seconds.
Weight: 142 gr.
Dimensions: 170 x 95 x 45 mm

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Infusion pump of volumetric type with peristaltic perfusion system that accepts universal type set. Comprehensive and effective solution to optimize infusion therapy in all the units of the Hospitals and Health Centers.

• Great quality. Easy to use. Menu in Spanish.
• It has a simple system to calibrate different sets of infusion and can be recorded up to 9 calibrations for different sets.
• It has a horizontal structure with an effective prevention against the entry of liquids. It can be hung from the serum support or placed on a table or car.
• High accuracy, due to an intelligent pulsating compensation made by a double micro-processed unit, resulting in a constant flow of high precision infusion.
• It has five types of infusion mode: Speed ​​mode, Drip mode, Body Weight mode, Time mode and Drug mode.
• Contains drip sensor.
• Contains ultrasonic bubble sensor, high sensitivity.
• It contains a pressure sensor that allows adjustment of 3 levels of occlusion pressure.
• High definition screen, allows the on-screen display of the controlled / running function.
• Illuminated alarm panel (up to 12 alarms). Interface for nurse call.
• Record of 1500 historical events.
• The following features and functions contribute to make the patient's treatment more pleasant:
• Preheating function of the infused solution, with constant temperature of the solution.
• When the pump door is opened, in a dark environment, a light is switched on automatically that allows changing the set or working on the infusion pump without turning on the ambient light.
• Silent operation and without vibrations, because it is equipped with a high quality motor.
• External DC power supply input, also works with 12 VDC input.
• Easy to transport due to its small size and weight (2.5 kg).

TECHNICAL SPECIFICATIONS
Specification of IV set: 20 drops / ml or 60 drops / ml.

Infusion flow rate:
•Set IV of 20 drops / ml:
0.1ml / h ~ 1500ml / h.
1 drops / min ~ 350 drops / min.
• Set IV of 60 drops / ml:
0.1ml / h ~ 200ml / h.
1 drops / min ~ 200 drops / min.
• When the speed is between 0.1ml / h ~ 99.9ml / h, the infusion flow rate is changed from 0.1ml / h.
• When the speed is above 100ml / h, the infusion flow rate is changed from 1ml / h.
• Accuracy: ± 5%.

Bubble Detector:
• Ultrasonic detection method: bubbles are detected above 25μl.

- Occlusion warning speed:
It can be divided into three ranges as indicated,
- High (H) 900mmHg ± 200mmHg (120kPa ± 26,7kPa).
- Central (C) 500mmHg ± 100mmHg (66,7kPa ± 13,3kPa).
- Low (L) 100mmHg ± 50mmHg (13.3kPa ± 6,6kPa).
• Flow rate of the Purge Bolus:
Adjustable between 600ml / h ~ 1000ml / h.
• Kvo rate (to maintain permeable route):
Adjustable minimum flow between 0.1ml / h ~ 5ml / h.

Built-in battery:
• Ni-Mh, 12 Vdc, 2300 mAh, the recharge cycle can be repeated up to 500 times.
• Operating time of the battery: with the battery fully charged, it can run continuously for more than 5 hours at a speed of 25ml / h.

Operation mode:
Keep going.

Protection against the ingress of liquids: IPX4 - Protected against splashing water in any direction.

Historical records:
You can store the historical records of more than 1500 infusions made.

Communication link: SN-1500H: RS-232.

• Supply voltage: 110V ~ to 230V ~ - 50Hz or 60Hz or 12Vcc-5A external.
• Maximum power: 40 VA.
• Classification: class I and internally powered.
• Protection against electric shocks: Type CF.

WORK ENVIRONMENT:
Operating conditions:
• Ambient temperature: + 5ºC to + 40ºC.
• Relative humidity: 20% to 90%.
• Atmospheric pressure: 645mmHg (86kPa) to 795mmHg (106kPa).
Storage conditions:
• Ambient temperature: -5ºC to + 55ºC.
• Relative humidity: 0% to 95%.
• Environmental pressure: 500mmHg (66,7kPa) to 797mmHg (106,3kPa).

ACCESSORIES INCLUDED
1 Power cable to line.
1 user manual.

CERTIFICATES
• Certified Quality Standard:
ISO13485.
Disp. A.N.M.A.T. 3266/2013: B.P.F.
Disp. A.N.M.A.T. 2319/02.
• Safety rules:
IEC 60601-1 (Eq IRAM 4220-1 and IEC 601-1- Req.
IEC 60601-1-2 (Electromagnetic Compatibility).
IEC 60601-2-24 (Infusion Pumps).

FREQUENT QUESTIONS
Do you use any brand of infusion set?
Yes, the pump is not dependent on any brand of supplies. It is recommended that the silicone IV Set be used.

Can it be used on animals?
Yes, it can be used on animals.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Infusion pump of volumetric type with peristaltic perfusion system that accepts universal type set. Comprehensive and effective solution to optimize infusion therapy in all the units of the Hospitals and Health Centers.

• Great quality. Easy to use. Menu in English.
• It has a simple system to calibrate different sets of infusion and can be recorded up to 12 calibrations for different sets.
• It has a vertical structure with an effective prevention against the entry of liquids. It can be hung from the serum support or placed on a table or car.
• High accuracy, due to an intelligent pulsating compensation made by a double micro-processed unit, resulting in a constant flow of high precision infusion.
• It has six types of infusion mode: Speed mode, Drip mode, Body Weight mode, Time mod, Infusion Plan and Drug Library or Drug Mode.
• Contains drip sensor.
• Contains ultrasonic bubble sensor, high sensitivity.
• It contains a pressure sensor that allows adjustment of 10 levels of occlusion pressure.
• High definition screen, allows the on-screen display of the controlled / running function.
• Illuminated alarm panel (up to 12 alarms). Interface for nurse call.
• Record of 1500 historical events.

The following features and functions contribute to make the patient's treatment more pleasant:
• When the pump door is opened, in a dark environment, a light is switched on automatically that allows changing the set or working on the infusion pump without turning on the ambient light.
• Silent operation and without vibrations, because it is equipped with a high quality motor.
• External DC power supply input, also works with 12Vdc input.
• Easy to transport due to its small size and weight.
• Interface USB.

TECHNICAL SPECIFICATIONS
Specification of IV set: 20 drops/ml or 60 drops/ml.

Infusion flow rate:
• Set IV of 20 drops/ml: 0.1ml/h ~ 1500ml/h.
• Set IV of 60 drops/ml: 0.1ml/h ~ 1500ml/h.
• When the speed is between 1ml/h ~ 99.9ml/h, the infusion flow rate is changed from 0.1ml/h.
• When the speed is above 100ml/h, the infusion flow rate is changed from 1ml/h.
• Accuracy: ± 5%.

Bubble Detector:
Ultrasonic detection method: bubbles are detected above 25μl.

Occlusion pressure value:
• Ten adjustable levels, with an error of ± 50mmHg or ± 25% (6.6KPa).
• Adjustment range: from 100mmHg (13.3KPa) to 900mmHg (120KPa).
Flow rate of the Purge Bolus:
• Adjustable between 5ml/h ~ 1000ml/h.
Kvo rate (to maintain permeable route):
• Adjustable minimum flow between 1ml/h ~ 5ml/h.

Built-in battery:
• Ni-Mh, 12 Vdc, 2300 mAh, the recharge cycle can be repeated up to 500 times.
• Operating time of the battery: with the battery fully charged, it can run continuously for more than 6 hours at a speed of 5ml/h.

Operation mode: Continuous.

Protection against the ingress of liquids: IP32.

Historical records:
You can store the historical records of more than 1500 infusions made.

Communication link: SN-1800V: RS-232.

• Supply voltage: 100V ~ to 240V ~ / 50Hz or 60Hz or 12Vdc external.
• Maximum power: 28 VA.
• Classification: class I and internally powered.
• Protection against electric shocks: Type CF.

Work environment:
• Operating conditions:
Ambient temperature: + 5ºC to + 40ºC.
Relative humidity: 20% to 90%.
Atmospheric pressure: 645mmHg (86kPa) to 795mmHg (106kPa).
• Storage conditions:
Ambient temperature: -20ºC to + 55ºC.
Relative humidity: 0% to 95%.
Environmental pressure: 375mmHg (50kPa) to 795mmHg (106kPa).

Weight: 1,8Kg.

Dimensions: 129mm x 130mm x 215mm (Width x Length x Height).

ACCESSORIES INCLUDED
1 Power cable to line.
1 user manual.

CERTIFICATES
• Certified Quality Standard:
ISO 13485.
Disp. A.N.M.A.T. 3266/2013: B.P.F.
Disp. A.N.M.A.T. 2319/02.
• Safety Standard:
IEC 60601-1 (Eq IRAM 4220-1 and IEC 601-1- Req.
IEC 60601-1-2 (Electromagnetic Compatibility).
IEC 60601-2-24 (Infusion Pumps).

FREQUENT QUESTIONS
Do you use any brand of infusion set?
Yes, the pump is not dependent on any brand of supplies. It is recommended that a silicone IV Set be used.

Can it be used in animals?
Yes, it can be used in animals.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Infusion pump door Sino MDT Ltd, model 1500H

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

PROPOSAL 1
Arrangement of the elements:
• CPU, printer, monitor, mouse and keyboard in cart inside the room,
• Preamplifier under the table in the hemodynamic room or on the track of the same.
Cost:
- Chageable: if the technician must go to the institution to perform the installation
- Free of charge: if telephone or videoconference support is provided from the factory.

PROPOSAL 2
Arrangement of the elements:
• CPU, printer, monitor, mouse and keyboard in cart inside the room,
• Preamplifier under the table inside the Hemodynamics room or on the track of the same.
• repeater monitor hung on existing monitor stand.
Cost:
- Chargeable: if the technician must go to the institution to perform the installation
- Free of charge: if the installation is attended by telephone or videoconference.

PROPOSAL 3
Arrangement of the elements:
• CPU, printer and monitor in bunker,
• wireless mouse and keyboard on the table in the catheterization room or in the bunker,
• Preamplifier under the table inside the hemodynamic room or on the track of the same,
• repeater monitor hung on existing monitor support with connection to bunker.
Cost: with charge, the technician will travel to the institution to carry out the installation.

It consists of carrying out the installation of the monitoring center and the connection with the Feas Electronica brand patient monitors.

Interconnection cable between CPU and preamplifier of Electrophysiology and Hemodynamic System with Optionals: / SpO2 / PNI for digital system
Connects the Polygraph Main Unit with the signal preamplifier box, which contains the connectors for the patient cables and sensors.
It is a cable, by default, 5m long, but you can request longer lengths by contacting our Customer Service for advice.
For exclusive use in Electrophysiology and Hemodynamic systems Mod. 1405, Feas Electrónica brand, for digital communication

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Cable to connect the multiparameter monitor to a wall connector of the installation of a Monitoring Central. They have a length of 1.5m and at both ends it has 1 female DB9 connector.
For use in multi-parameter monitors of Feas Electrónica brand, exclusively.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between catheter extender and polygraph preamplifier

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between hemodynamic studies preamplifier and catheter extension box. They have variable lengths according to the installation of the equipment, use in hemodynamic polygraphs and electrophysiology of Feas Electronica brand exclusively.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between signal retriever and Polygraph CPU

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Feas Electrónica Intraesophageal/rectal temperature sensor DB9M/G

The electronic esophageal-rectal temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in the esophagus or in the rectum.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.90m.
Protection against ingress of liquids: IPX2

The Temperature sensor should only be used with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraph and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Replacement suction pump for CO2 Modules, in multiparameter monitors. Exclusive use in Feas Electronic´s multiparameter monitor, with Optional CO2 Side Stream, brand Feas Electronica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Keyboard for Comen electrocardiographs, models CM100 and CM300


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Keyboard for Feas Electrónica equipment, used mainly in monitoring central station and polygraphs for hemodynamic studies.

The keyboard must only be used with the following equipment: Polygraph for hemodynamic studies model 1405 and Monitoring Central Station model 5032C. The user is responsible for ensuring compatibility between the keyboard and any other equipment.

Cable length: 1.5 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Lingual sensor, reusable clip type, for the non-invasive measurement of blood oxygen saturation of veterinary patients. It allows to visualize the oxygen saturation (SpO2), the pulse frequency and the plestographic curve. Exclusive use in Feas Electronica multi-parameter monitor , under supervision of trained staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.