Self-adhesive keyboard with LEDs for 3600 Defibrillator
Self-Adhesive keypad for Defibrillator 3600

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self-adhesive polycarbonate of "SILENCE" key for Multipar keyboard
Self-adhesive polycarbonate of "SILENCE" key for Multipar keyboard

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self-adhesive polycarbonate of key "ESC" for keyboard of Multipar
Self-adhesive polycarbonate of key "ESC" for keyboard of Multipar

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Set of 4 limb clamps electrodes, adult for ECG Comen, model CM100 or CM300, 040-000143-00
Set of 4 limb clamps electrodes, adult for ECG Comen, model CM100 or CM300, 040-000143-00

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Set of 6 precordial suction cup electrodes, adult, for ECG COMEN model CM100 or CM300, 040-000466-00
Set of 6 precordial suction cup electrodes, adult, type cup
For ECG COMEN model CM100 or CM300

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Silicone hose for NIBP, 3m length
Silicone hose to be connected at one end of the cuff used for non-invasive pressure measurement and at the other end to be connected to the multiparametric monitor. Its length is 3 meters, making it easy to carry out the measurement remotely to the equipment.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Silicone hose for irrigation pump (Physiodispenser)
Silicone hose for irrigation pump (Physiodispenser)

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Silicone hose for irrigation pump (Physiodispenser)
Silicone hose for the irrigation pump of the Physiodispenser Micromotor for dental implantology.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Solenoid valve, Koge KSV05B
Solenoid valve, Koge KSV05B

Maximum current: <60 mA
Escape velocity: <6 seconds
Tightness: 3.0 mmHg / min
Maximum pressure: 300mmHg
Applications: blood pressure monitor, etc.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
SpO2 extension cable, DB9MG/DB9F
The SpO2 extension cable is used to extend the length of the oxygen saturation (SpO2) sensor. It is indicated for all Feas Electrónica brand oximeter sensors.

Extension length: 3 meters.

Protection against ingress of liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Spike Set Sino MDT Ltd
Spike Set SINO MDT Ltd for enteral feeding pump.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Spike set for Enteral Nutrition Pump
Spike set for enteral nutrition pumps

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Spiraled cable of Oxygen sensor for FiO2, Feas Electrónica
Cable used to adapt the sensor output used for measuring inspired oxygen fraction (FiO2) to the patient monitoring system. Exclusive use in a Feas Electronica multiparameter monitor, under the supervision of trained health care personnel.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Spiraled cable of Oxygen sensor for FiO2, Feas Electrónica
Cable used to adapt the sensor output used for Inspired Fraction of Oxygen (FiO2) measurement to the patient monitoring system. Exclusive use in Feas Electrónica multiparametric patient monitor, under the supervision of personnel trained in health care.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Suction electrodes for ECG with rubber bulb, for adult patients
Precordial electrodes for electrocardiograph.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Syringe Infusion Pump Model SN-50T66, three channels, standard support
GENERAL CHARACTERISTICS
* It is characterized by its high precision, stable flow rate and low dosage. It is particularly used for the infusion of sodium nitroprusside, dopamine, propofol and antibiotics for acute and severe diseases.
* The equipment can store personalized syringe information from 33 different manufacturers, Weigao and 32 other manufacturers, configurable by the user.
* The SN-50F66 pump can use sterile and disposable syringes of 5ml, 10ml, 20ml, 30ml or 50ml. It Automatically recognices the placed syringe.
* The equipment can store up to 2000 historical infusion records, which include the following information: injection mode, injection rate, alarm information, total volume injected, threshold value of the line of occlusion pressure limit, limiting quantity, number of syringe and operation information.
* It has the following alarm functions:
Incorrect position of the syringe.
Residual Limit
Occlusion
End of injection.
No operation
Empty syringe.
Flow limit exceeded.
Plunger decoupled.
Power cord disconnected.
Battery discharged.
Battery exhausted
System error
* Battery operating time: starting from a full charge, the battery can withstand 5 hours of operation at a speed of 5 ml / h on two channels.
* Allows operation and battery charging from the 12V connector of the car.

TECHNICAL SPECIFICATIONS
Dimensions: (Length x Width x Height)
3-channel pump: 469mm x 277mm x 207mm
Weight:
3-channel pump: 5.4kg (includes support).
Feeding:
AC input: 100V ~ to 240V ~, 50/60 Hz.
DC input: 12Vdc
Battery voltage: 12Vdc
Nominal power: 40 VA.
Quality Standards: ISO13485, Disp. A.N.M.A.T. 3266/2013: B.P.F. and Disp. A.N.M.A.T. 2319/02; certified.
Safety Standards: UNE-EN 60601-1. (Eq. IRAM 4220-1 and IEC 601-1), Class I - Prot. Desc. Elect .: CF, UNE-EN 60601-1-2 (Electromagnetic Compatibility).
Authorized by A.N.M.A.T .: PM 1125-18.

ACCESSORIES
● 1 Power cable.
● 1 User manual.
● 1 List of content.
● 1 Certificate of manufacturing quality.
● 1 Warranty card.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Syringe infusion pump model SN-50C66T: one channel, standard support, with weight mode
Syringe infusion pump model SN-50C66T is a constant volume, channel and speed controlled infusion pump. It is characterized by high precision, stable flow rate and low dosage.

It is used particularly for the infusion of sodium nitroprusside, dopamine, propofol and antibiotics for acute and serious illnesses. The pump has multiple types of alarm functions to ensure a safe and reliable infusion process.

This product is used to clinically control the flow and velocity of fluids (drugs, nutrients, and blood) infused into the patient's body for safer use.

GENERAL CHARACTERISTICS
* The equipment can store customized syringe information from 33 different manufacturers, Weigao and 32 other manufacturers, configurable by the user.
* SN-50C66T pump can use sterile and disposable syringes of 5ml, 10ml, 20ml, 30ml or 50ml. Automatically recognizes the syringe in place.
* The equipment can store up to 2000 historical infusion records, which include the following information: injection mode, injection rate, alarm information, total volume injected, threshold value of the occlusion pressure limit of the path, limiting quantity, number of syringe and information of the operation.
* It has the following alarm functions:
Incorrect position of the syringe.
Residual limit.
Occlusion.
End of injection.
No operation.
From empty syringe.
Flow limit exceeded.
Plunger decoupled.
Power cord disconnected.
Discharged battery.
Dead battery.
System error.
* Battery operating time: starting from a full charge, the battery can support 6 hours of operation on one channel at a rate of 5 ml / h.
* Allows operation and battery charging from the car's 12Vdc connector.
* Intended User: Adult, Pediatric, Neonatal

TECHNICAL SPECIFICATIONS
* Dimensions:
306mm x 140mm x 146mm (Length x Width x Height)
* Weight: 2.25kg (includes support).
* Electrical feeding:
AC input: 100V to 240V, 50/60 Hz.
DC input: 12Vdc.
Battery voltage: 12Vdc.
Nominal power: 40 VA.

CERTIFICATES:
* Quality standards:
ISO13485
Disp. A.N.M.A.T. 3266/2013: B.P.F.
Disp. A.N.M.A.T. 2319/02
* Safety rules:
UNE-EN 60601-1. (Eq. IRAM 4220-1 and IEC 601-1), Class I - Prot. Desc. Elect .: CF
UNE-EN 60601-1-2 (Electromagnetic Compatibility).
Authorized by the A.N.M.A.T .: PM 1125-18.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
TID serum hanger
TID serum hanger

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Temperature sensor Feas Electrónica- PLUG 6.5mm
Feas Electrónica temperature sensor - PLUG 6.5mm

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Temperature sensor for GC COSET compatible BD SP4045-DB9MG
Temperature sensor for GC COSET compatible BD SP4045-DB9MG

Months Warranty: 3

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.